I was impressed today

[georgemyers]

Woke up, which is always good
Mid to high 70's with bright sun shinning .
And then it happened......My HS1 was deliverd by FedX

First inpression.........Factasic
Unit shipped in crate which was inside a big cardboard box.
Opened the box/crate took off some wrapping and d**n...
VERY nice machine, workmanship on a scale of 1-10 is somewhere north of 20.

Ron knows how to build a quality piece of equipment.

More to follow.........

[shebdave]

I got mine about a year ago and I had the same impression. Awesome packing. Awesome build quality. I wanted to take pictures of the crate and packing....but I could not wait to get it apart to look at it to waste time with pictures.

Dave

[georgemyers]

Ron

Please let me know when it would be a good time to contact you. I have a question or two.

Is there a configuration file for Mach3?
Are all the electrical points on the machine on a common ground?

Thanks
george

Shebdave

I took a few. Put then on the CNCzone under a thread called Romaxx, can't see how to add here like others did. The more I looked at the individual parts last night the more I was impressed.

[romaxxcnc]

Hi George,

I sent the Config file and your license to Lorali's email. I was of the understanding your other address wasn't working.

Let me know, Ron

P.S. Thanks for the wonderful comments guys, we really appreciate it.

[georgemyers]

Oops, when trying to post I messed up this one and lost it.

[georgemyers]

Got around to playing with the router today. Cut a piece of corian. The wife wanted something to put under the coffee maker to make it easy to pull from back of the countrer. Put 2 small “Hot Coffee” engravings on it that was in a Vector Art collection I have.

I cut it too deep and need to space a little more between letters. I have to get use to working with .00 - .000 place measurements. Looks like its time to hunt up some very small dia engraving bits.

I like the accuracy of the HS1. I think I re-homed it 3 or 4 times after starting the test engraving on MDF. I made depth changes in VcarvePro and reloaded the file back to Mach3. Each time it started cutting the updated file spot on where it started before Have I said yet that I like the Romaxx.

Also had a chance to see how the mini Clear Vue cyclone works with a shop vac when used with 3 inch PVC and two different diameter size hoses. (I did not expect it to work very well)

Few pic here: www.cnczone.com/forums/showthread.php?t=50224