|
Post by 3fingersshort on Mar 24, 2010 20:02:49 GMT -5
on a WD-1, to lube the xyz screws? Mine makes a lot of squeaking and rumbling and just wondered if this would help, or make things worse by attracting dust and crap, and gumming up. Anyway, happy milling and thanks for any advice.
|
|
|
Post by romaxxcnc on Mar 26, 2010 8:49:19 GMT -5
Hello,
Yeah, don't use any oil based lubricants. Use a dry type lubricant. Woodkraft sells some.
Ron
|
|