|
|
Post by rdagger on Jun 19, 2010 20:08:30 GMT -5
I picked up a vacuum clamp on sale at Rockler. I cut 2 signs today and it held like a vice. I have a small compressor and it had no trouble running for several hours. Attachments:
|
|
|
|
Post by rdagger on Jun 19, 2010 20:11:34 GMT -5
Had no trouble cutting this 15"x9"x1" piece of cedar. Attachments:
|
|
|
|
Post by bjenkins on Jun 19, 2010 22:38:56 GMT -5
Nice.
|
|
|
|
Post by georgemyers on Jun 19, 2010 23:14:30 GMT -5
Great idea, can you tell us the measurements on the bolt pattern on the hold down tabs? And just want to confirm when you said you cut out the sign, did you use the it when you did the profile cut? If so I have to get one.
thanks
george
|
|
|
|
Post by rdagger on Jun 20, 2010 12:32:34 GMT -5
I cut the profile on the vacuum clamp. I'm not in front of the router now, but I think the holes are approximately 3.6", 2.8" from the center point of the clamp.
|
|
|
|
Post by nova290 on Jun 20, 2010 19:35:08 GMT -5
Just bought two. I'll see how they are! Thanks for the info
|
|
