|
Post by cobra18t on Oct 5, 2010 20:26:41 GMT -5
Has anyone setup the Romaxx HS-1 for use with Linux EMC2? There seems to be a discrepancy between the "Romaxx pin settings.txt" file and the Mach3 xml file on pin settings. Also, the pin settings txt file does not contain all the necessary information for configuration. Does anyone have any of this information (see attached images)? Attachments:
|
|
|
Post by cobra18t on Oct 5, 2010 20:27:26 GMT -5
second image... Attachments:
|
|
|
Post by cobra18t on Oct 5, 2010 20:27:55 GMT -5
third image. Attachments:
|
|
|
Post by romaxxcnc on Oct 6, 2010 15:12:17 GMT -5
Motor pinouts which changed a while back are:
X axis Step 2 Dir 6 Y axis Step 3 Dir 7 Z axis Step 4 Dir 8 A axis Step 5 Dir 9
On the HS the motor tuning is as follows
X And Y axis are 714 steps
Z axis is 10,000
-Ron
|
|
|
Post by romaxxcnc on Oct 6, 2010 15:15:59 GMT -5
Depending on the age of the machine and what breakout board you have, this may also be the motor pinouts
X axis Step 2 Dir 3 Y axis Step 4 Dir 5 Z axis Step 6 Dir 7 A axis Step 8 Dir 9
It's one or the other, we used no other combination's.
Ron
|
|
|
Post by cobra18t on May 1, 2011 19:25:37 GMT -5
I read that the stepper drivers are Geckodrive 201's. Is this true?
|
|
|
Post by romaxxcnc on May 1, 2011 21:28:21 GMT -5
Yes, that is true. We actually use the Gecko G201X drives now. Better drive, more reliable.
-Ron
|
|