Post by silyavski on Mar 29, 2011 11:17:57 GMT -5
Hi,
i ordered the HS-1 with alu table and closed loop. so now is the time for a motor
i asked Ron by email, but maybe he is busy so i need a spindle advice. Though i am a total noob i understand that the spindles are less noisy and better suited for the job.
So, what is the recommended HP or wats that HS1 can comfortably move? I am looking at some spindles/ italian and maybe chinese at the worst case:-)/ and wonder if i go with 2 1/2hp to 1.5hp if the machine would move it comfortably. From the specs it seems they are 4-6 and up to 8kg. Also nowhere i seem to find an answer if 18 000 rpm is enough or i have to go with 24000 rpm. any links to affordable non chinese slpindles? thanks
i ordered the HS-1 with alu table and closed loop. so now is the time for a motor
i asked Ron by email, but maybe he is busy so i need a spindle advice. Though i am a total noob i understand that the spindles are less noisy and better suited for the job.
So, what is the recommended HP or wats that HS1 can comfortably move? I am looking at some spindles/ italian and maybe chinese at the worst case:-)/ and wonder if i go with 2 1/2hp to 1.5hp if the machine would move it comfortably. From the specs it seems they are 4-6 and up to 8kg. Also nowhere i seem to find an answer if 18 000 rpm is enough or i have to go with 24000 rpm. any links to affordable non chinese slpindles? thanks