4th and 5th axis with Romaxx CNC?

[neeboy74]

Hello to all:

I'm seriously considering buying an HS-1, but I want to have a setup with a trunnion/rotary table in a 4th-5th axis setup. Can I buy the HS-1 and add these components into the setup easily?

[penaffair]

I'm also considering a Romaxx machine and need a rotary axis (either 4th or swappable with X) and wondering if the Romaxx machines can either be supplied this way, or upgraded after market?

Thanks. Russell.

[romaxxcnc]

Hi Russel,

We do have a 4th axis unit available. We supply the unit, additional electronics, necessary wiring with a plug on the front panel for the unit for 1200.



Specifications
Diameter 4" (100 mm)
Capacity 11 lbs (5 kg)
Maximum Torque 7647 oz-in (54.00 Nm)
Ratio 40 to 1
Vertical Center Height 2.7" (68 mm)
Rotational Accuracy 5 seconds
Backlash (Mechanical) 0.0020" (0.050 mm)
Baclash (Compensated) 0.0004" (0.010 mm)
T-slot Width 0.3" (8 mm)
Maximum Speed 10 RPM
Body Size 3.1" x 5.0" x 4.3" (78 mm x 127 mmx 110 mm)
Overall Size 5.5" x 9.6" x 4.3" (140 mm x 245 mmx 110 mm)
Net Wweight 26 lbs (12 kg)
Shipping Weight 43.5 lbs (19.8 kg)

Thanks, Ron

[penaffair]

Thanks Ron, that looks like a very nice unit.

[greggarriss]

Beautiful work, Ron.. What's the MSRP?? :-)

[romaxxcnc]

Hi Greg,

We can include it on an order for 1200. Or add it to an existing machine for 1200 plus shipping. The way that works: Send us just the electronics drawer, then we add the necessary electronics including a plug on the front panel. Makes a nice modular add on.

Thanks, Ron

[silyavski]

looks very rigid