A new carving

[esteeme1]

Hi All,

I haven't posted here much but have enjoyed my WD-1 for quite awhile and wanted to share some of my work. As I said, "I haven't posted here much" so hope this works.

Attachments:

[esteeme1]

That didn't seem to work?

Attachments:

[esteeme1]

Sorry I'm not sure what I'm doing wrong. The dowload is not working for me.

[esteeme1]

Okay I found a post that requires photo sharing and thought I would try this. www.esteemedwoodcrafts.com/index.php?supermode=gallery_view&previewm=1&a=Eagle_Flag_Anchor_Plaque&image=120313060424_eagle_flag_anchor_plaque.jpg&screenres=1152-864

[esteeme1]

Whoo Howww! it worked. here are two more.

www.esteemedwoodcrafts.com/index.php?supermode=gallery_view&previewm=1&a=Eagle_Flag_Anchor_Plaque&image=120313060424_eagle_flag_anchor_close_up.jpg&screenres=1152-864
www.esteemedwoodcrafts.com/index.php?supermode=gallery_view&previewm=1&a=Eagle_Flag_Anchor_Plaque&image=120313060424_eagle.jpg&screenres=1152-864

[jimwill52]

Looks like I'm having the same issue... I emailed Ron to see if it is something on the forum.

[romaxxcnc]

Esteeme1,

Nice work!

To post an attachment: The pic must be uploaded to a file sharing site like Photobucket. Then copy and paste the IMG code in your post here and it will be displayed.

-Ron

[esteeme1]

Ron,

Thanks for the complement and info and it was good talking with you again. I'll give it a shot.

Jim,

Wow, You completley threw me off gaurd. Thanks so much for the honors and accolades. Your quality of work and attention to detail is well above par and there are lots to learn from you.