|
5v DC
Dec 14, 2012 22:27:19 GMT -5
Post by georgemyers on Dec 14, 2012 22:27:19 GMT -5
Hi, Ron
Wondering if can get a source of 5v DC 150mA to max 500mA from the port 1 board. I see that Pin 13/15 (A/B Channel) connector has 5VDC and would like to use it.
|
|
|
5v DC
Dec 15, 2012 11:24:23 GMT -5
Post by romaxxcnc on Dec 15, 2012 11:24:23 GMT -5
Hi George,
If you're talking about the MPG port on the breakout board and the terminals marked 5v and GND, Yes that can be used for 150 mA load.
-Ron
|
|
|
5v DC
Dec 15, 2012 13:46:47 GMT -5
Post by georgemyers on Dec 15, 2012 13:46:47 GMT -5
Thanks Ron
|
|