|
Post by rbryndza on Mar 3, 2013 16:59:14 GMT -5
Hello, In operation I can only get the upper outlet to switch on during file execution, I cant get the lower one to automatically switch on. I imaging there is something I'm missing. Any ideas? Thanks
|
|
|
Post by jimwill52 on Mar 3, 2013 22:49:02 GMT -5
I believe mine both came on with the start of a toolpath. You might email Ron directly.
|
|
|
Post by romaxxcnc on Mar 4, 2013 11:04:17 GMT -5
Rick,
I replied to the email as well
To turn on the lower receptacle try an M8 in the code instead of an M7.
This got switched some where along the way on one of the Mach3 releases. I'm going to look in to it today.
-Ron
|
|
Jim
New Member
Posts: 36
|
Post by Jim on Mar 4, 2013 11:08:26 GMT -5
Ron,
The lower outlet does not work on mine either. Let me know f you find a fix.
lameiii
|
|
|
Post by romaxxcnc on Mar 4, 2013 12:30:46 GMT -5
Jim,
I just made a new screenset with the correct OEM code. I will email it to you to try.
-Ron
|
|
|
Post by jimwill52 on Mar 5, 2013 10:05:22 GMT -5
|
|