cdi3d
New Member
Posts: 13
|
Post by cdi3d on Oct 13, 2013 11:28:53 GMT -5
Hey Guys - I thought I would share my dust collection setup and air diverter for the router - I cut tons of thin .060 - .094 sheets of g10 - The best thing I added to my dust collection was diverting all the router air up rather than down - The black diverter attached to the router is made in two parts and attached together with magnets - I can change tools without the need to remove it. It diverts all the routers air up and keeps my shop and table very clean as you can see in the video. I am using a 1.5 hp dust collector with a custom dust skirt attached in the slot of Ron's dust shoe. I find I am getting about 99% of all the dust from my machine and I think the air diverter is the biggest addition to my setup. vimeo.com/76807743Hope this helps some of you - Please message me directly if you have more questions at mikecdi3d@gmail.com
|
|
cdi3d
New Member
Posts: 13
|
Post by cdi3d on Oct 16, 2013 10:26:05 GMT -5
Here is how the diverter separates Attachments:
|
|