bybon
New Member
Posts: 4
|
Post by bybon on Nov 14, 2013 15:56:16 GMT -5
I have several pieces of MDF and would like to make some spare tables for my machine (HS-1)while I wait on its arrival. What is the size of the table, bolt hole sizes and where are the holes located?
If a member has any tips on adding anything to the board before it is mounted, that would be helpful. Thanks
|
|
|
|
Post by seesawsaw on Nov 21, 2013 0:49:33 GMT -5
I glued sandpaper to my board so the work pieces wouldn't slip around.
|
|
bybon
New Member
Posts: 4
|
Post by bybon on Nov 21, 2013 12:40:31 GMT -5
That is a clever idea. I imagine skate board tape would do the same. Thanks
|
|
|
|
Post by mendler on Nov 23, 2013 23:20:42 GMT -5
Gluing an abrasive material to your wasteboard is actually a pretty bad idea. You need a soft rigid material that the bit can plunge into without harming it. If you never do any full dive cuts through your material I suppose that will suffice but if you cut 2D parts then any kind of sandpaper will dull your bits extremely fast.
|
|
