|
Post by avwoodworking on Dec 30, 2013 15:43:10 GMT -5
I got the Romaxx Vacuum Foot with my HS1. After looking at the Store picture and many others with it on their machine, it seems mine has a much shorter (~ 1/4") bristle strip on it. All the others I've seen, including the store pic, look to have at least a 1" bristle strip. This seems like a much better solution to the 1/4" that is on mine. The 1/4" doesn't allow much clearance even over low profile clamping i've tried. The taller ones look like they would be no issue.
Where have you guys sorced the strips and how are they replaced (press fit?)?
Thanks,
|
|
|
Post by avwoodworking on Jan 3, 2014 9:45:35 GMT -5
bump, no one knows where to source a longer bristle strip?
|
|
|
Post by romaxxcnc on Jan 3, 2014 14:47:32 GMT -5
Hello,
We don't use 1/4" strip brush in the vacfoot. We use 1.5" and .75" strip brush. The longer strip brush was leaking vacuum and not working as well. We changed to the .75" or 3/4" strip brush a few years ago.
I have sent you an email in reply to yours, we have the 1.5 or 1-1/2" strip brush.
-Ron
|
|
|
Post by mendler on Apr 22, 2014 1:15:20 GMT -5
If you search "conveyor brush" on mcmaster, you will find what you're looking for.
|
|