ronb
New Member
Posts: 4
|
Post by ronb on Nov 19, 2015 21:19:41 GMT -5
I have just installed the mach3.xml file from Ron for Mach 3. Under the ports and pins/ Motor outputs I see that the X Axis Dir Low active has an X in the box where the Y and Z axis both have check marks. Is the X axis correct or should it also have a check mark?
Is there any manuals or diagrams for the HS-1 machine? I bought it from a friend who never used it. I'm new to CNC and struggling a bit to understand the inner workings.
Any help or advice would be appreciated.
RonB
|
|
|
Post by romaxxcnc on Nov 20, 2015 11:19:31 GMT -5
Dirlowactive only determines the direction of the axis when commanded.
-Ron
|
|