|
Post by rlk6166 on Jul 12, 2016 16:20:55 GMT -5
I have a WD-1 machine, which I have not run for several months. My machine shuts down traveling in the Y direction. I am cutting a pocket 5" square. I do a restart and sometimes it will work okay and other times it will just shut down. With ESTOP flashing, the display is "ESTOP due to servo drive disable". Where do I start to trouble shoot?
|
|
|
Post by rlk6166 on Aug 7, 2016 13:25:21 GMT -5
Just to share an update. I did talk to Ron and I installed the UC100 USB converter. Right now I am machining some small items and all seems to be doing well.
|
|
|
Post by romaxxcnc on Dec 1, 2016 13:59:08 GMT -5
It was a timing issue with the PC itself. The UC100 USB adapter takes the timing issue off of the PC load.
Thanks, Ron
|
|