|
Post by selphb on Apr 22, 2017 19:24:20 GMT -5
I just tried turning on the machine after not ussing it for a long time. It acts like it is running a program and the x & z axis start jumping around. What would cause this issue?
|
|
|
Post by romaxxcnc on Apr 24, 2017 8:10:38 GMT -5
Hi Brad,
How is this set up? Using a UC100 or other device? What type of computer? This sounds like a communication issue where the pulse train is intermittent i.e. CPU stalling.
-Ron
|
|
|
Post by selphb on Apr 29, 2017 17:06:03 GMT -5
The issue turned out to be a bad cable. I do have another issue and will email you on it this weekend.
|
|