|
|
Post by nemo13 on May 8, 2017 19:57:27 GMT -5
I'm putting in a UC 400ETH ethernet, it needs 12v power, any place to patch them from anywhere? Or if not I have a Drok AC to 12v dc, possible to just tap into the AC input on the board? Thanks!
|
|
|
|
Post by romaxxcnc on May 9, 2017 17:55:51 GMT -5
There is no place in the electronics to get 12vdc. I haven't tried one of the UC400's yet, that is strange they used 12vdc instead of 5vdc.
-Ron
|
|
|
|
Post by nemo13 on May 9, 2017 19:17:17 GMT -5
Yeah, I didn't see anything, oh well. It does use 5v, but it has a 12v (or) 24v input that drops it down to 5v. Have no idea why. I have a little Drok power supply AC to 12v DC, I'll just use that and run the AC from the panel power input to the power supply. I'm pretty excited about the ethernet, since you can have longer cables than USB, I have a computer nice and clean and cool inside the house in a room next to the garage wall and using wireless keyboard and mouse. Have the monitor mounted on a wall.
|
|
