TAZ
New Member
GEAR HEAD
Posts: 23
|
Post by TAZ on Jul 23, 2007 16:49:55 GMT -5
Here is my first project. I hope the picture shows up!  |
|
|
|
Post by romaxxcnc on Jul 23, 2007 18:52:08 GMT -5
Tim,
Very nice!
Thanks, Ron
|
|
TAZ
New Member
GEAR HEAD
Posts: 23
|
Post by TAZ on Jul 25, 2007 10:22:36 GMT -5
[glow=red,2,300]Are you going to make a "Gallery" section that we can upload pictures of all our projects? ;D[/glow]
|
|
|
|
Post by romaxxcnc on Jul 25, 2007 11:09:47 GMT -5
Tim,
Thats a great idea. I guess the forum here has provisions for that. I'll talk to Mike about it...
Thanks, Ron
|
|
|
|
Post by samcrow on Oct 30, 2007 20:06:03 GMT -5
Did anything happen on the picture gallery? Here is a recent small project. It is a custom designed Euchre score board. It is Cherry wood, designed using VCarve Pro.  |
|
|
|
Post by Superdave on Nov 1, 2007 11:48:20 GMT -5
That looks great Can we share the code with Romaxx users as long as not for profit  Hey Ron hows the files and photo section coming Thanks Dave |
|
|
|
Post by romaxxcnc on Nov 1, 2007 15:35:31 GMT -5
Hi Dave,
Sure, you guys can share G-code with one another, no problem at all.
Post the file on wikiupload etc and then post a link to it here.
The photo section I think will be linked to photobucket.
Looks good Sam.
Back to work for me, extremely busy here.
Thanks guys, Ron
|
|
TAZ
New Member
GEAR HEAD
Posts: 23
|
Post by TAZ on Nov 26, 2007 19:41:33 GMT -5
Awesome work SamCrow....
What software do you use to make your G-code? What do you run your machine with?
Keep up the great work!
|
|
|
|
Post by samcrow on Nov 26, 2007 21:23:27 GMT -5
The design and g code is done using Vcarve Pro (see other references in this forum, Ron is now a dealer). Mach 3 runs the Romaxx.
|
|
